Skip to content
Broke Dad Builds
Region and language USD
Region and language

Country/region and currency

0 items in cart

Cart

Your cart is empty.

Expanded product image

A roll of Soundbath Pro Plus sound isolation material next to its retail packaging box on a white background.

Expanded product image

Two rolls of Soundskins vehicle liner shown on a white background, one roll black and one roll white, with text detailing the size and coverage of the large sheet.

Expanded product image

Roll of soundproofing material with text highlighting its benefits on a white background

Expanded product image

SoundScrubbers foam isolation pad shown in a product infographic with callouts detailing its 0.12" thick foam, 0.

SoundSkins Global

SoundSkins Pro Plus Workshop Kit, 64.5 sq ft 3-Layer Sound Deadening Roll

Price: $494.00

Product details

Description

The SoundSkins Pro Plus Workshop Kit is a single continuous roll of 3-layer sound deadening, 29.5" wide and 315" (over 26 ft) long, for a total of 64.5 sq ft. That is enough to treat a typical car from top to bottom: doors, floor, trunk and roof. Every inch combines rubber butyl, foil and closed-cell acoustic foam, so you stop panel vibration and block road noise in one pass. It is also the lowest cost per square foot in the SoundSkins Pro range, which makes it the go-to choice for full builds and install shops.

Specifications

Product SoundSkins Pro Plus Workshop Kit
SKU SSK-PROPLUS
Total Coverage 64.5 sq ft
Roll Size 29.5" x 315" (one continuous sheet)
Contents 1 roll on a cardboard tube
Total Thickness 0.18"
Layer Build 0.12" closed-cell foam, 0.0039" foil liner, 0.059" rubber butyl
Temperature Rating -40°F to 356°F (-40°C to 180°C)
Application Temperature 50°F to 70°F
Water Resistance Waterproof foam and butyl layers
Fitment Universal, cut to fit
Warranty Lifetime, against manufacturer defects

Save More When You Buy More Rolls

Running an install shop or treating more than one vehicle? Apply a multi-roll code at checkout:

Rolls Code Discount You Save Price per sq ft
1 None None None $7.66
2 PRO2 10% off $98.80 $6.89
3 PRO3 15% off $222.30 $6.51
4 PRO4 20% off $395.20 $6.13
5 PRO5 25% off $617.50 $5.74

A Full Car From One Roll

Here is where 64.5 sq ft typically goes in a sedan. Every vehicle is different, so use this as a planning guide:

  • All four doors: Outer skins, access holes and speaker areas, for better mid-bass and quieter doors.
  • Floor: Front and rear footwells under the carpet, where tire noise and exhaust drone come through.
  • Trunk: Trunk floor, wheel wells and lid, the main source of rattles when you run a subwoofer.
  • Roof: Behind the headliner, to cut rain noise and wind roar at highway speeds.

Only treating the doors and trunk? The Pro Mega Kit (44 sq ft) may be enough. Just doing the doors? See the Pro Two Door Kit.

Why a Continuous Roll Beats Pre-Cut Sheets

Floors and roofs are the biggest, most awkward panels in a car. With pre-cut sheets, you end up joining several small pieces, which leaves seams and wasted offcuts. The Pro Plus is one 29.5" wide sheet over 26 feet long, so you can cut a full floor section or roof panel in one piece. That means fewer seams, less waste and a faster install, which is exactly why shops choose it.

One Layer Does the Work of Two

The usual approach to sound deadening is a butyl mat to stop vibration, followed by a separate foam layer to block airborne noise. SoundSkins Pro bonds both into a single 0.18" sheet. The butyl kills panel resonance, the foil keeps it tight to the metal and the closed-cell foam absorbs noise and cushions trim. You buy one product and do one install instead of two. See how SoundSkins Pro works.

Installing a Full Car

  • Work in stages: Doors first, then the trunk, then the floor and roof, so the car is never fully stripped at once.
  • Template the big panels: Trace floor and roof sections on paper before cutting to get the most out of the roll.
  • Prep every surface: Clean with isopropyl alcohol and apply between 50°F and 70°F for the best bond.
  • Roll it down: Press firmly with a roller, especially on the roof, so the butyl grips fully overhead.
  • Keep it clear: Leave drain holes, seat bolt holes, wiring and airbag areas (such as roof curtain airbags) uncovered.

Frequently Asked Questions

Is one Pro Plus roll enough for a whole car?

For most sedans, yes. 64.5 sq ft usually covers all four doors, the floor, the trunk and the roof. Larger trucks and SUVs may need a second roll, and the PRO2 code gives you 10% off two rolls.

What is the difference between Pro Plus and the Pro Mega Kit?

Both use the same 3-layer material. Pro Plus gives you 64.5 sq ft on one continuous roll at a lower cost per square foot. The Mega Kit gives you 44 sq ft in four sheets, which suits doors plus trunk or floor.

Can I use it on the roof?

Yes. It bonds well overhead when rolled firmly, and it helps cut rain noise and wind roar. Keep it away from curtain airbag areas along the roof edges.

Do installers get a bulk discount?

Yes. Multi-roll codes give 10% off 2 rolls (PRO2), 15% off 3 rolls (PRO3), 20% off 4 rolls (PRO4) and 25% off 5 rolls (PRO5).

Is there a warranty?

Yes. SoundSkins sound deadening is covered by a lifetime warranty against manufacturer defects.

Not sure it fits your truck?

Send us your year and cab and we’ll tell you straight.

Ask us on the contact page

Stay in the loop

Join the Broke Dad crew

New video updates, fresh parts, subscriber-only discounts, and practical DIY info, straight to your inbox!

Unsubscribe anytime.